WHAT IS THE FLAME ARRESTOR (SAFETY VALVE) USED FOR HYDROZONE AND HOW IS IT USED?

Hydrozone welding machine, which has been used more widely lately, can be dangerous if necessary precautions are not taken and sufficient information is not obtained about its use. Of course, it is an equally useful machine when the necessary training and precautions are taken. Even though you are an expert and experienced, small mistakes made from time to time can cause big problems. There is definitely a SOLUTION for every problem. The biggest problem that can occur with a hydrozone (electrozone) welding machine is getting fire into it . Considering that business life is busy and stressful, it is understandable that distractions are inevitable. As a result of these distractions, the fire that needs to be turned off after we are done with the machine can be turned off by using the wrong method (by slowly closing the air of the nozzle while there is fire at the tip of the needle). As a result of this incorrect shutdown, major financial consequences may occur on the internal parts of the machine. That's why it is very important to use the product we call fire arrester (safety valve) and it is definitely recommended to use it.

What is a flame arrester (safety valve)?

- Fire arrester (safety valve) : It is a product that provides one-way passage of the gas produced by the hydrozone machine. It has a certain pressure range and is an extremely important and effective product when used for this pressure range.

How to use fire arrester (safety valve)?

- If you have the opportunity, ask a technical service to install this product on your machine.
- If you purchased this product yourself, you can install this product on your machine by following these steps:
1- Make sure that the product you have purchased is compatible with your machine.
2- Cut the hose coming from the outer chamber of the hydrozone welding machine near the outlet. (make sure the machine is turned off)
3- Attach the fire arrester (safety valve) to the end of the hose you have cut, in the direction of the arrow, on the part of the hose that is not connected to the machine. In other words, the direction of the arrow (showing in which direction the gas will move) must be in the same direction as the direction of the fire coming out of the machine. Then, attach the other part of the valve (opposite the direction of the arrow) to the free end of the hose entering the machine.
As a result of all these processes, you can use your machine safely.

What did I learn in this guide?

In this guide, you have learned how to install the fire arrester (Safety Valve) and how to use the fire arrester (Safety Valve). In this way, you can take precautions against any negativities that may occur while using the hydrozone welding machine (Electrozone machine).

How to use Hydrozone Welding Machine? How to use the Fire Arrestor (Safety Valve) that you have read in our blog post? Our blog post will be more descriptive for you.